Corrosion properties of structured sheet metals in salt environment
Abstract
In the present paper the corrosion properties of structured sheet metals were investigated. The aim of this work is to determinate the influence of the structuring process on the corrosion resistance of sheet metals. For this purpose, these sheets were examined by accelerated tests in corrosion chamber. The investigation was carried out using salt spray test. The experiment was conducted for the low carbon steel DC04 in 5% NaCl environment. As a measure of corrosion damage, the weight loss was taken. The experiments point out that the steel weight loss is increasing appreciably with duration of the corrosive environment exposure. The results are presented for structured and smooth sheet metals as reference. A clear effect of the structuring process on the corrosion behaviour was observed. The results of the salt spray test show that structured sheet metals have a higher corrosion rate than smooth sheet metals. Structured sheets at the structure location “positive” have a lower corrosion rate than at the structure location “negative”. The difference of corrosion properties between structured and smooth sheet metals is becoming increasingly apparent with advancing corrosion process. The regression models were developed for the weight loss rate as function of exposure time. Furthermore, the thickness reduction of structured and smooth sheet metals was calculated.Downloads
Published
Issue
Section
License
Engineering review uses the Creative Commons Attribution-NonCommercial-NoDerivatives (CC-BY-NC-ND) 4.0 International License, which governs the use, publishing and distribution of articles by authors, publishers and the wider general public.
The authors are allowed to post a digital file of the published article, or the link to the published article (Enginering Review web page) may be made publicly available on websites or repositories, such as the Author’s personal website, preprint servers, university networks or primary employer’s institutional websites, third party institutional or subject-based repositories, and conference websites that feature presentations by the Author(s) based on the published article, under the condition that the article is posted in its unaltered Engineering Review form, exclusively for non-commercial purposes.
The journal Engineering Review’s publishing procedure is performed in accordance with the publishing ethics statements, defined within the Publishing Ethics Resource Kit. The Ethics statement is available in the document Ethics Policies.